Home > Software > VTiQ RheoApp

HAAKE Viscotester iQ RheoApp Software, version 2.4.4.19

Download the RheoApp software files

This is a fully executable version of the HAAKE Viscotester iQ RheoApp software.

Note: A product key ist NOT needed (anymore), the RheoApp software will work with any VT iQ !

Download the following *.ZIP file and copy it to a new empty directory on your hard drive.

• Download file (File: VTiQ_RheoApp_Flashdrive_24419.zip,  71,2 Mb, updated 11.04.2023)

The following document gives an overview over the changes in the VTiQ firmware

• Download RheoApp What's new (File: New_RheoApp.doc, 2 kb)

Then unzip the *.ZIP file using any suitable unzip program and copy ALL the files and directories to the root of an USB flash drive (see the screenshot below).
Note: The directory System Volume Information is automatically created by Windows and not part of the RheoApp flash drive directory structure.

Note:

• The USB flash drive must use the FAT32 file format (i.e. not the FAT or NTFS file format)
• The HAAKE Viscotester iQ RheoApp software does not need to be installed
• The HAAKE Viscotester iQ RheoApp software can only be launched from an USB flash drive, that is NOT from a computer hard disk.

Screenshot: