Home > Software > RheoWin 4.91.0021
HAAKE RheoWin Software, version 4.91.0021
Download the RheoWin files
This is a fully executable version of RheoWin 4.
Note: In order to be able to install RheoWin 4 on your computer you need a RheoWin 4 License Key !
Download the following *.ZIP file and copy them to a single (temporary) directory on your hard drive.
Then unzip the *.ZIP file using any suitable unzip program.
In case you do not have an (UN)ZIP program you can download a freeware ZIP program from
the following Web-site:
http://www.ozemail.com.au/~nulifetv/freezip/index.html.
SHRP element and Asphalt/Bitumen software module
Note:
-
The SHRP evaluation element is now part of the new Asphalt/Bitumen software module and
not part of the standard installation anymore.
Customers with a valid RheoWin installation key (issued before 01.01.2021) can request a special installation key (order no. 098-5567) for the SHRP evaluation element at no cost.
-
The new Asphalt/Bitumen software module consists of the new MSCR, the new BYET and the new LAS evaluation elements as well as the existing SHRP evaluation element.
A special installation key (order no. 098-5566) is needed to install the Asphalt/Bitumen software module.
Updates for versions 4.91.00xx
There are currenlty no updates for version 4.91.0021
Virtual com port driver for Viscotester D and Viscotester E
The virtual com port driver for the Viscotester D and Viscotester E is available for download here.
Virtual com port driver for SC and AC circulators
The virtual com port driver for the new SC and AC circulators is available for download here.
Updates/Downloads for Foculus camera (RheoScope module)
New FGControl software and drivers for Windows 7, 8, 8.1, 10 and 11 64-bit and 32-bit.
For Windows 7, 8, 8.1, 10 and 11 both in the 32-bit and the 64-bit versions the use of the new FGControl software and drivers is obligatory.
Driver for the new USB3 3iCube cameras
Supported rheometers, viscometers, temperature control systems and other devices
-
RheoWin 4 currently supports the following HAAKE instruments:
Rheometers |
Viscometers |
Circulators |
Temp.Controllers |
MARS 40 |
|
SC150, ACxxx, PCxxx** |
MTMC (MARS I, III, 40, 60, iQ, iQ Air) |
MARS 60 |
Viscotester iQ Air |
ACCEL** |
UTMC |
MARS iQ Air |
|
|
|
MARS iQ |
|
DC5 |
|
MARS I |
Viscotester iQ |
DC30, DC50 |
|
MARS II |
VT550 |
F6, N6, F8, N8 |
CTC (Oven) |
MARS III |
|
|
|
RheoStress 6000 |
RotoVisco 1 |
Phoenix |
UTC |
RheoStress 3000 |
|
|
|
RheoStress 600 |
VT D, VT E |
Dynamax |
|
RheoStress 300 |
|
|
|
RheoStress 1 * |
|
|
|
-
*
RheoWin 4 currently does not support the first series of RheoStress 1 instruments, for these
instrument only RheoWin 3.x upto version 3.5x can be used.
The first series of RheoStress 1 instrument can be recognized by the silver coloured drive motor shaft.
The second series of RheoStress 1 instrument have a dark coloured drive motor shaft.
-
**
A firmware update may be needed for these devices to be compatible with RheoWin,see here.
-
Starting from RheoWin 4.70.0000 the following older instruments are not supported anymore.
Rheometers: RS150, RS80, RS75, RheoScope 1 and RT20
Viscometers: VT6L, VT6R, VT7L, VT7R as well as the VT7L-plus and VT7-R-plus
Thermocontrollers: TC80, TC81, TC500, TC501
Circulators: F3C
For these instruments please use
RheoWin 4.63.0004.
-
RheoWin 4 does not support older instruments like the RT10, VT500, VT501 and the RV20+RC20/RV30 with CV20, CV100, M5 or M10.
For these instruments please use RheoWin 2.97.
-
RheoWin 4 does not support the RS100 1 Ncm, the RS100 5 Ncm und the RS50.
For these instruments please useRheoWin 3.61.
-
The new FGControl driver for the (RheoScope) Foculus camera is compatible with
the 32-bit and 64-bit Windows versions of Windows 7, Windows 8 and Windows 8.1.
-
The older FOControl driver for the Foculus camera is compatible with Windows XP 32-bit only.
-
The driver for the previously used Sony XCD-X710 camera is only compatible
with RheoWin 4.50.00xx under Windows XP 32-bit.
Supported operating systems
-
RheoWin 4.91.00xx has been tested to run under the following Windows operating systems:
- Windows 11 (64-bit version, a 32-bit version of Windows
11 does not exist).
- Windows 10 (both the 32-bit and the 64-bit version).
- Windows 8.1 (both the 32-bit and the 64-bit version).
- Windows 8 (both the 32-bit and the 64-bit version).
- Windows 7 (both the 32-bit and the 64-bit version).
-
RheoWin 4.91.00xx is NOT supported for use under the following operating systems:
- Windows Vista with or without any Service Pack.
- Windows XP with or without any Service Pack.
- Windows ME
- Windows 98 SE
- Windows 98 with Y2K update and Internet Explorer 4.01 SP2
- Windows 95
- Windows 3.x
- Windows NT3.x
- Windows 2000 with Service Pack 1 (or higher)
- Windows NT4.0 with Service Pack 6 and Internet Explorer 6
-
We recommend the use of a PC according to the specifications given by Microsoft for the operating system used.
In order to be able to install this version of RheoWin on your computer you will need a valid RheoWin 4 license key.
A RheoWin 3 or a RheoWin 2 key will not enable you to install RheoWin 4.0.
A separate license key is needed for installing the tools for FDA 21 CFR
part 11 compliance. A separate license key is also
needed to install the TTS (Time Temperature Superposition),
Spectra and MWD (Molecular Weight Distribution) tools as well as for
the installation of some other optional software features.
The keys for RheoWin 4 consist of a company name, serial number and the key code. When you receive the key per e-mail
this information will be stored in a *.key or *.txt file which can be opened and viewed by using any text-editor (Notepad, Write, Word, etc.).
The key information must either be entered manually (as in
previous versions) or loaded from the supplied *.txt file (this is
new for version 4.40) during the installation process.
A Key-Diskette for RheoWin 2.x or a RheoWin 3.x key will NOT enable
you to install RheoWin 3, however the upgrade from RheoWin 2 or RheoWin 3 to RheoWin 4 is free
of charge (shipping and handling costs may apply).
In order to request a RheoWin 4 license key download the RheoWin Key order form
fill it out as completely as possibly, save it and send it to support.mc.de[at]thermofisher.com (replace [at] by @). You will then receive your new key per e-mail.
Installation of RheoWin 4
For a detailed and complete description of the RheoWin installation see
the HAAKE RheoWin Installation and 21 CFR part 11 configuration User
Guide, which is part of the downloaded zip file and can also be downloaded using the following links: